New Video: Charvel Model 3A

Similarly to my BC Rich ST-III video, this guitar is now off to its new owner! Nothing like selling a guitar off that I will most likely never see again to put the pressure on to make a video!

I got this guitar years ago and it’s in truly superb condition. It was dusty and the truss cover still had the plastic on it! I imagine this guitar spent a lot of time sitting in someone’s closet or under the bed. I lowered the action a bit and really enjoyed playing it. The pickups are some of my favorites in the range and I find them to be very dynamic especially when paired with an amp without much compression.


New Video: BC Rich ST III

Just before I sent my ice blue ST-III off to its new owner this week, I put together this video to showcase its features and quirks. I’ll definitely miss this guitar, it has a really fantastic neck and it was in great condition for its age. The Ibanez Edge trem is one of my favorites and it was cool to have that bridge on a guitar that wasn’t an actual Ibanez too.

My plan is to make videos for every guitar and amp I have, so I have a lot of material to work on, so subscribe to my youtube channel! I’ll do my best to put out a video every week or two. Enjoy!


New Guitar: Charvel Model 4 Rainbow Crackle!

Wow! I spotted this one online at GC, and it had no picture - but it was described as a Model 3DR “Rainbow Crackle.” I figured for the price, I’d risk the purchase and find out what kind of condition it was since I can always return it if I don’t like it.

Luckily, there’s no danger of that, this is a fantastic guitar. It’s not a 3DR, it’s a Model 4, but that is fine with me. In fact, I might prefer that because I’m a big fan of the shark tooth inlay necks and the HSS pickup config is so useful across a variety of styles. This came with the factory J50BC and J200 pickups, the JE-1200 mid boost circuit, and JT-6 trem - just like my other two Model 4’s - but in the interest of a change of pace, I’ve already swapped out the J50BC with a zebra Dimarzio Super Distortion. This pickup previously lived in my Charvel Fusion, but has been unused for a while since I sold that guitar months ago.

I think this pickup might have too strong of a midrange to really cooperate with the JE-1200 mid boost, but that’s ok. Since the mid boost is not that clearly different sounding in the bridge position, it means I can set it however I like for the neck and middle single coils and not worry about how the sound will change when I need to use the bridge position.

The real highlight here is the finish of course, otherwise it’s just a standard and great sounding Model 4. The finish is a transition from blue to red to yellow crackle, and there is a little bit of a fade in between them. There are some purple and orange hues visible in thinner stripes between the colors, but it’s not as clear as the primary colors.

This is my first crackle job Charvel, and I’m also surprised to see it has a very slight texture visible through the top finish when looking at it under the light or at a shallow angle. Overall this is one of the coolest finishes on any guitar I own, and I think the very tight pattern looks great. Looking around the web, I’ve seen other crackle jobs that are a bit more spread out with more black in between the colors, I think those look really cool too and I’d love to have both variations someday.

New Guitar: 1988 Carvin DC125 - Pointy Headstock!

This will surprise a lot of people, but growing up I was a really big Bangles fan - even before I played guitar. I enjoyed their musical style, and I appreciated the melodies and guitar riffs, largely played by Vicki Peterson. She was a Carvin endorser during this time and could be seen playing DC125’s and similar models all the time - usually with the “V” headstock but occasionally with the pointy shape too. This band is the same reason I ended up with the Jetglo Rickenbacker 360 too, especially early on in my guitar learning experience.

So I’ve finally gotten a proper, 80s Carvin DC! These are tough to find, and in hindsight looking at the catalogs and pricing I can’t believe these weren’t selling like crazy, especially now that I have one to play. The quality, fit, finish, and hardware is impeccable. Mine is equipped with gold hardware, including an gold original floyd rose (not so common back then!) and Carvin brand tuners which feel very high quality. The pickup is an M22SD, which is a high output mid-heavy pickup perfect for rock and metal, plus a coil tap. Even the mounting screws of the pickup are gold - a nice touch - along with the input jack plate too.

You can also differentiate this 1989 model from 1988 models by looking at the strap buttons, mounted at the tip of the upper horn. 1988 models have the upper horn strap button is mounted on the underside, towards the neck instead of on the tip. It’s also noteworthy that during this time, these could be ordered with flat mount Kahler 2300 tremolos (as used on ‘86 Charvels and plenty of others), tune-o-matic bridges, or Original Floyd Rose bridges.

This one has the “Jackson” style pointy headstock, although this is not exactly a Jackson shape - it has a much thinner profile especially evident on the bottom edge nearer to the nut. This shape was only available for 1988 and 1989, prior to that the either had a more traditional 3x3 headstock, or the “V” headstock I mentioned earlier (check out the Hazy Shade of Winter video for a clear view of that shape, on Vicki’s DC200). From 1990 onwards, Carvin reworked their shape, likely to avoid any copyright conflicts, to a new shape which I also really like. Here is my ‘89 headstock shape below so you can see just how long and thin it is, and held side by side with a Jackson they are actually quite different.

Another interesting thing is the rear of the headstock which has a very large volute, and no screws through the neck for the locking nut. This is also really unique for the time, manufacturers like Hamer and others continued mounting the locking nut screws through the headstock well into the 90s.

Considering the price - this guitar would’ve been under $700 back in 1989 - this is a heck of a guitar and I’m glad to have one in such great shape. Other than the gold hardware, mine looks nearly identical to this one in the 1989 catalog ad - very cool. I’d love to get my hands on another one, especially with some slightly different options (block inlays maybe?).

New Guitar: BC Rich ST-III Ice Blue

After enjoying some time with the natural color ST-III I acquired barely 2 months ago, I really wanted to have another in another color. This one popped up on ebay with the original case, paperwork, and in excellent condition and I had to pick it up.

It arrived in extremely good condition, other than a few small nicks on the top of the body it’s in superb shape for the age. This is another 1987 model, but this time fitted with the factory pickups - two single coils and a humbucker all made by Dimarzio. These pickups do not have model numbers, as Dimarzio provided a lot of OEM specific models that don’t necessarily have a direct comparison to a pickup in their catalog (Dimarzio did this for Ibanez and others). The single coils are very low output, proper vintage sounding, and the humbucker surprised me - medium to low output with a really flat response. I was expecting a higher output, mid-heavy pickup as was the style in this era and especially on a guitar like the ST3 which I assume was aimed more at the shred and rock/metal players.

Of course I have plenty good to say about the Ibanez Edge bridge and the neck, which has a lovely bare feel and a super thick rosewood fretboard. I know it’s tough to do a fair comparison between two guitars that are over 30 years old now, but this one feels very consistent with the other ST-III I have. Both play very similarly, with similar body weights and identical necks. Any tonal differences seem to be just from the different pickups and body finish than anything with the construction of the guitars, which is always a good sign - as a big Kramer collector, I’m not used to very consistent quality control!

I’ve also done some digging and found some details on these guitars from the catalog. It appears these two are both relatively mundane models, but they could be ordered with maple or ebony fingerboards, binding, graphic paint jobs, or even neck-through configurations. I’d love to see an ST-III with a bound maple board, what a cool guitar that would be - and based on some of the other custom configurations I’ve seen around the web I’m sure there’s probably one out there.

New Guitar: BC Rich ST-III with Roland GK setup

I’ve always liked the look of these and they have a pretty unique history, coming out in the late 80s during a time when BC Rich was struggling financially and eventually ended up selling their brand name to Class Axe. This guitar is from before the sale, in 1987 - USA made and a very fine quality instrument. These also used top mounted Ibanez Edge tremolos, which were very new at the time and are close to OFR quality - some even prefer these trems to OFR’s and I can see why.

I picked this one up for a great price from Guitar Center, and it came equipped with a Roland GK-2A pickup. I doubt the natural finish is original, but if the original color was stripped they did a very clean job and the light satin finish is very well done. I’ve never had a Roland GK before either, so I look forward to trying it out - my initial look at Youtube videos makes this system look extremely cool and I’d love to be able to play some synthesizer or saxophone parts on my guitar!

In addition to the satin finished body, the neck is also a very bare wood feeling on the back, with an extremely thick slab of rosewood for the fretboard. When it arrived, this guitar had a Parallel Axis PATB-3 pickup in the bridge position, which is a sweet sounding pickup if a little lower output than I usually prefer in the bridge position, and a Quarter Pounder in the neck which is a highlight - I’m surprised just how much I like this high output, bassy single coil pickup.

New Guitar: Charvel Model 2 Electric Blue

Another guitar center find, this one popped up online for a very reasonable price that I could not refuse. It arrived and is in surprisingly great condition besides a small light colored mark on the top edge of the body - it looks a little bit like paint, like you would use on the walls of your house. It also came equipped with a Seymour Duncan SH-12 Screamin’ Demon, one of my favorite humbuckers for its thick tone and with a single pickup, a versatile one like this helps make it more practical when rolling off the volume than other high output pickups.

New Guitar: Charvel Model 3A '86

I picked this up as a bit of a change in pace compared to my other Charvels - this one is equipped with a Kahler, USA made, fulcrum tremolo called the “2520.” This trem is similar in design to a modern strat trem, with two anchor points instead of the traditional six, and the addition of fine tuners to pair with the locking nut at the headstock. While it’s not a true double locking, floating tremolo like a Floyd Rose, it’s actually a very good bridge - and quite forward thinking for the time. It gets a pretty bad rap around the web, but I was impressed with it, although my expectations were low which helps. The biggest detractor is that the spacing of the studs is too close for a direct swap with just about any other bridge - anyone who had an ‘86 Model 2 or Model 3 with this bridge would have to plug and re-drill holes in order to upgrade the bridge to something else.

I personally would never modify an original like this one, which happens to be in fantastic shape. The factory J80C pickups are meaty and thick sounding, similar to Duncan Customs, and I think this pickup sounds incredible in the neck position even if a bit high output. As long as the heights are adjusted, the volume difference isn’t too bad, and a 3-way blade switch makes it easy to switch between them. Later 3A’s had the 5-way blade switch, which gives split coil sounds in positions 2 and 4 but this particular one is too early for that feature.

Two Single-Humbucker Guitars, One Weekend

It’s been an eventful few days here. My replacement Proaxe neck arrived and is bolted up now finally (thanks UPS), along with acquiring another very special neck (no spoilers yet!). Plus, two new guitars through the door just in time for Thanksgiving - a 1987 Charvel Model 5A in “Black Cherry” finish and a 1989 Kramer Baretta I in “Snakeskin.” Now that’s a rare color!

I actually know an owner of the snakeskin Baretta, it’s changed hands quite a few time since he’s had it, going from east coast USA to west coast, then all the way to the UK, before finally landing back here with me in Florida. It’s a shame in that time it has seen a few mods, such as a hole for a strap button on the rear of the upper horn, jack plate added, and a mini switch added. Still, it’s a great player and certainly eye catching.

The Model 5A came from Guitar Center, nothing too exciting about that, until I picked it up and played it. Wow, that neck through design can really get very low action without much setup effort and it really wails now that I’ve removed the 25k pot (somebody must’ve had EMG’s in this before) and put in a 500k and Jackson J90C pickup.

A few teasers:

As always, there will be more pictures and details on their respective pages.

Baretta I Details

Model 5A Details

Happy Thanksgiving!